Timing Component Alignment Marks: Locations

Refer to Timing Chain & Sprockets - Installation. Service and Repair





While holding the camshaft phaser in hand, position the timing chain on the camshaft phaser and align the timing marks as shown.





GWhile holding the camshaft phaser and timing chain in hand, position the timing chain on the crankshaft sprocket and align the timing mark as shown.





Align the slot in the camshaft phaser with the dowel on the camshaft and position the camshaft phaser on the camshaft while sliding the crankshaft sprocket into position.
5. Install the camshaft phaser retaining bolt (1) finger tight.







Rotate the crankshaft two revolutions and verify the alignment of the timing marks (1, 2). If the timing marks do not line up, remove the camshaft sprocket and realign.