Trailer Adapter Kit: Service and Repair

STANDARD PROCEDURE - TRAILER TOW HARNESS INSTALLATION





1. Remove the push pin fasteners (2) and separate the rear tail lamp assemblies (1).





2. Disconnect the tail lamp electrical connectors (2 and 3).





3. Connect the harness (2) to the left side tail lamp electrical connectors (1).





4. Position the harness (1) through the tail lamp opening and down the side of the fender.
5. Secure the support clips (2) to the body seem.





6. Position the harness (1) over the exhaust and fasten the push pin fasteners (2) to the under side of the rear bumper in the existing holes.





7. Position the harness (1) up the right side of the vehicle to the right tail lamp opening and secure the clips (2) to the body seem.





8. Connect the harness (1) to the right side tail lamp electrical connectors (2).





9. Connect the tail lamp electrical connectors (2 and 3) to the tail lamp assemblies (1).





10. Install tail lamps assemblies (1) and install the push pin fasteners (2) fully.