A/C And Heater Control - Removal

REMOVAL

Special Tools:






NOTE: Take the proper precautions to protect the face of the rear A/C-heater control bezel from cosmetic damage during this service procedure.





1. Disconnect and isolate the negative battery cable.
2. Remove the rear A/C-heater control (3) and bezel (1) as an assembly from the headliner by releasing the four metal retaining tabs (2) using Trim Stick or equivalent.
3. Disconnect the wire harness connector from the back of the rear A/C-heater control and place the control and bezel assembly on a workbench.
4. Remove the two screws (4) that secure the rear A/C-heater control to the rear control bezel and remove the control from the bezel.