Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2012 >> RAM 1500 Truck 2WD V8-4.7L >> Repair and Diagnosis >> Starting and Charging >> Charging System >> Alternator >> Service and Repair >> Generator - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Generator - Installation






3.7L / 4.7L

1. Position the generator to the engine and install the two horizontal bolts and the one vertical bolt. Tighten all three bolts to 55 Nm (40 ft. lbs.).
2. Snap the field wire connector into the rear of the generator.
3. Install the B+ terminal eyelet to the generator output stud. Tighten to 12 Nm (8.8 ft. lbs.).

CAUTION: Never force a belt over a pulley rim using a screwdriver. The synthetic fiber of the belt can be damaged.

CAUTION: When installing a serpentine accessory drive belt, the belt must be routed correctly. The water pump may be rotating in the wrong direction if the belt is installed incorrectly, causing the engine to overheat. Refer to belt routing label in engine compartment, or Refer to the Belt Schematics in Cooling System.

4. Install the accessory drive belt Serpentine Accessory Drive Belt - Installation.
5. Connect the negative battery cable.
pro multis · About Operation CHARM