Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2012 >> RAM 2500 Truck 4WD L6-6.7L DSL Turbo >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Coolant Temperature Sensor/Switch (For Computer) >> Service and Repair >> Engine Coolant Temperature Sensor - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Coolant Temperature Sensor - Removal






6.7L DIESEL






WARNING: Hot, pressurized coolant can cause injury by scalding. Cooling system must be partially drained before removing the coolant temperature sensor.

1. Partially drain the cooling system Service and Repair.
2. Remove the engine trim cover.
3. Remove the upper EGR tube (2).Exhaust Gas Recirculation (EGR) Tube - Removal
4. Remove heat shield.
5. Disconnect the electrical connector (2) from the ETC sensor (3).
6. Remove the ETC sensor from the cylinder head.

pro multis · About Operation CHARM