Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2012 >> RAM 2500 Truck 4WD L6-6.7L DSL Turbo >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Engine Control Module >> Service and Repair >> Powertrain Control Module - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Powertrain Control Module - Removal






6.7L DIESEL

NOTE: To avoid possible voltage spike damage to the Powertrain Control Module (PCM), ignition key must be off, and both negative battery cables must be disconnected before unplugging PCM harness connectors.

1. Record any Diagnostic Trouble Codes (DTC's) found in the (PCM).

NOTE: For automatic transmission vehicles, disconnecting the battery before the 10 minute power down will result in the Fault Code P2509. This fault code will need to be cleared before returning to the customer. Also, same for manual transmissions but the time limit is 75 seconds.

2. Disconnect both negative battery cables.






CAUTION: If the connector latch is packed with dirt or debris, clean connector latch first with electrical contact cleaner otherwise damage to the connector housing may result when trying to open a dirty connector.

3. Disconnect the PCM harness connectors (3) and harness retainer (1) from PCM (4).





4. Remove bolts (1 and 2), and the PCM (3) from engine.

pro multis · About Operation CHARM