Programming and Relearning

DRIVE MOTOR TEACH PROCEDURE

REPLACEMENT DRIVE MOTOR

1. Operate the sunroof manually and continuously through one full Vent and Slide cycle.
2. After completion of complete cycle, release sunroof switch. Sunroof will now operate normally.
3. Verify sunroof express function operation.

ORIGINAL DRIVE MOTOR

1. Press and hold sunroof Vent switch until the sunroof glass vents and stops.
2. Release sunroof switch.
3. Press and hold sunroof Vent switch once again for at least 15 seconds. After 15 seconds of pressing the Vent switch, the sunroof glass will automatically move and stop at a new location.
4. Release sunroof switch.
5. Operate the sunroof manually and continuously through one full Vent and Slide cycle.
6. After completion of complete cycle, release sunroof switch. Sunroof will now operate normally.
7. Verify sunroof express function operation.