Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2013 >> Avenger V6-3.6L >> Repair and Diagnosis >> Body and Frame >> Relays and Modules - Body and Frame >> Door Module >> Service and Repair >> Door Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Door Module - Installation







INSTALLATION






1. Position the door control module to the front door hardware module carrier.

2. Install and tighten the four screws that secure the door control module to the front door hardware module carrier. Tighten the screws securely.

3. If the vehicle is so equipped, reconnect the black 12-way electrical connector (3), then the brown 20-way electrical connector (2) followed by the black 10-way electrical connector (1) to the door control module connector receptacles.

4. Reinstall the trim panel to the inside of the front door. Front Door Trim Panel - Installation.

5. Reconnect the battery negative cable.

6. The Clear/Relearn procedure should be performed following service of a door control module so that the module can learn the correct hard stops of the power window regulator. Programming and Relearning.

pro multis · About Operation CHARM