Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2013 >> Avenger V6-3.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Powertrain Control Module - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Powertrain Control Module - Removal







REMOVAL






CAUTION:
Do not disconnect the Powertrain Control Module (PCM) electrical connectors before the ignition key is in the off position and the battery cable disconnected. If these steps are not preformed damage to the PCM may result from a voltage spike.

NOTE: The ground strap (3) for the PCM is located at the lower most forward stud. It is not required to remove the ground wire from the stud unless replacement is required.

1. Disconnect the negative battery cable.
2. Disconnect the Powertrain Control Module (PCM) electrical connectors (1).

3. Remove the three nuts (2, 4) and remove the PCM from the battery tray.

pro multis · About Operation CHARM