Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2013 >> Grand Caravan V6-3.6L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Accessories and Optional Equipment >> Parking Assist Control Module >> Service and Repair >> Park Assist Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Park Assist Module - Installation






INSTALLATION






1. Position the Park Assist Module (PAM) (1) to the right quarter inner panel (2), to the rear of the C-pillar and above the right rear wheel house.

2. Engage the two lower mounting tabs of the PAM into the stamped pockets in the right quarter inner panel.

3. Reinstall the plastic push-in fastener (4) that secures the upper mounting tab of the PAM to the right quarter inner panel.

4. Reconnect the two body wire harness connectors (3) to the PAM connector receptacles.

5. If equipped, reinstall the Passive Entry (PE) Low Frequency (LF) antenna. .

6. Reinstall the trim onto the right quarter inner panel. Quarter Trim Panel - Installation.

7. Reconnect the negative cable to the battery.

pro multis · About Operation CHARM