Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2013 >> RAM 1500 Truck 2WD V8-4.7L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Keyless Starting System >> Keyless Start Antenna >> Service and Repair >> Remote Start Antenna - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Remote Start Antenna - Installation






INSTALLATION





The Remote Start Antenna Module Assembly consists of an electrical connection to the Remote Frequency Hub(1), a length of coax cable (2), two mounting clips (3) and (4), and a control module/antenna (5).

The control module is located behind the rear cab panel. The module electrical connector plugs into the RF Hub which is also located in the rear cab panel.

1. Disconnect and isolate negative battery cable.

2. Install remote module assembly and connect the harness.

3. Connect the coax cable electrical connector at the RF hub

4. Install left side rear cab trim panels and install panel push pins back in place.

5. Install left rear child seat tether.

6. Install left rear seat.

7. Install left rear seat front mounting bolts

8. Installl the left rear seat rear inboard bolt with seat belt buckle.

9. Flip the left rear seat cushion back down.

pro multis · About Operation CHARM