Information Bus: Service and Repair

CAN C DASH STAR CONNECTOR REMOVAL

CAUTION:
If the CAN C Dash Star Connector locking tab is not released properly, damage to the connector housing may occur.

1. Remove the glove box assembly. Release the two glove box stops (1) and lower the glove box (2) downward past the stops.





2. Remove the right front scuff panel (1).





3. Remove the passenger silencer panel.
4. The CAN C Dash Star Connector (1) is located to the right of the HVAC housing (2), mounted to the right inner lower A-pillar.





5. Using a pic tool (3), insert the tool between the back of the Star Connector and the sheet metal to release the lock tab. Pull down on the Star Connector (1). This will release the Star Connector from the right inner lower A-pillar.