Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2013 >> RAM 1500 Truck 2WD V8-5.7L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Body and Frame >> Keyless Entry Module >> Service and Repair >> Radio Frequency Module (RF Hub) - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Radio Frequency Module (RF Hub) - Removal






REMOVAL

The Remote Frequency Hub (RF Hub) Module Assembly consists of a harness connector and two pushpin.

The control module is located behind the rear cab panel beneath the rear sliding glass assembly. Note that the remote start antenna is plugged directly into the RF Hub.






1. Disconnect and isolate negative battery cable.

2. Flip the left rear seat cushion.

3. Remove the left rear seat rear inboard bolt with seat belt buckle.

4. Remove left rear seat.

5. Remove left rear child seat tether. Child Seat Anchor - Removal

6. Remove rear left side rear cab trim panel push pins to remove panel. Cab Back Trim Panel - Removal

7. Disconnect coax cable electrical connector at the RF hub (1).

8. Disconnect harness (2) and remove the RF Hub retainers. (3)

pro multis · About Operation CHARM