82 - Number of Tone Ring Teeth Out of Range

NUMBER OF TONE RING TEETH OUT OF RANGE - 82
For a complete wiring diagram, refer to Wiring Diagram Information.

When Monitored
Ignition on.

Set Condition
The DTC will set if the stored tone wheel tooth count is out of range.

Possible Causes
- TONE RING/AXLE SIZE MISMATCH
- ANTI-LOCK BRAKE MODULE

Diagnostic Test
1. TONE RING/AXLE SIZE MISMATCH
Turn the ignition on.
With the DRBIII (R) determine the axle size that is programmed into the Controller Anti-lock Brake.
Inspect and identify the vehicle axle size.
Compare the axle size programmed into the Anti-lock Brake Module, and the actual axle size installed into the vehicle.

Does the programmed axle size match the installed axle?
Yes >> Replace the Controller Anti-lock Brake in accordance with the Service Information. Refer to the symptom *Replacing the Anti-lock Brake Module. Testing and Inspection
Perform ABS VERIFICATION TEST - VER 1. ABS Verification Test
No >> Reprogram the Anti-lock Brake Module in accordance with the Service Information.
Perform ABS VERIFICATION TEST - VER 1. ABS Verification Test