Lumbar Support Handle/Bezel

LUMBAR SUPPORT HANDLE/BEZEL

REMOVAL






CAUTION: Care must be taken not to damage the handle or bezel surface when removing.

1. Using a trim stick (special tool #C-4755) or equivalent, pry the manual lumbar knob out of the bezel surround.




2. Remove the bezel retaining screws (2) and remove the bezel (3).

INSTALLATION




1. Align the bezel (3) to the seat back and install the screws (2).




2. Snap the manual lumbar knob onto the shaft of the drive mechanism into the bezel surround.