Installation

INSTALLATION




1. Carefully position the door (2) to the upper (1) and lower (3) hinges using a suitable lifting device.

2. Loosely install the nuts (4) to the door studs and hinges at the lower A-pillar.

3. Align the door to the body using the reference marks made during the removal procedure.

4. Tighten the hinge to door nuts to 36.5 Nm (27 ft. lbs.).





5. Connect the door harness electrical connector (1) to the body connector (2) at the lower A-pillar.

6. Connect the negative battery cable to the battery.

7. If necessary, adjust the front door.