Installation

INSTALLATION




1. Install fan blade assembly to viscous fan drive. Tighten bolts to 23 Nm (17 ft. lbs.) torque.
2. Position fan blade/viscous fan drive assembly into the radiator shroud.
3. Install the radiator shroud and fan drive assembly into the vehicle.
4. Install fan shroud retaining screws. Tighten screws to 6 N.M (50 lbs. in.)
5. Using Tool 6958, install the fan blade/viscous fan drive assembly to the water pump shaft. Tighten mounting nut to 50 Nm (37 ft. lbs.).
6. Install the upper radiator hose.
7. Fill cooling system.
8. Connect battery negative cable.