Installation

INSTALLATION

1. If fuel pump module is to be installed, install module to tank.

2. Place tank to a hydraulic jack and raise just enough to connect fuel pump module electrical connector.

3. Continue raising tank until snug to body.




4. Install tank mounting bolts (3) at both sides of tank. Tighten to 61 Nm (45 ft. lbs.).




5. Tighten two nuts (3) at tank support bracket (1) to 61 Nm (45 ft. lbs.).

6. Install bolt (2). Tighten to 61 Nm (45 ft. lbs.).

7. Install rear propshaft.




8. Connect vapor lines (4) and (5) at rear of tank.

9. Connect fuel fill hose and clamp (6) at rear of tank.




10. Connect fuel line quick connect fittings (1) and (2) at front of fuel tank (5).

11. Lower vehicle, fill tank with fuel and install fuel fill cap.

12. Check for fuel leaks.