Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Sensor Inspection
VOLTAGE TESTING PROCEDURE: 1.
Connect a voltmeter between terminal 1 and 4 of the
crank angle sensor connector.
Terminal 1: Sensor ground
Terminal 4: Camshaft (TDC) signal
2.
Measure the output voltage of the terminals while cranking the engine.
Standard Approximate Value: 2.0 - 2.5v
3.
When the voltage is abnormal, check the sensor power and ground circuits.