Water Pump: Service and Repair

WATER PUMP





Removal
Pre-removal Operation:
- Engine Coolant Draining
- Timing Belt Removal

Follow removal steps outlined in illustration.

Installation
Installation in reverse order as removal.

Installation Service Point





A. O-Ring Installation.
Insert the O-ring to the water inlet pipe, and coat the outer circumference of the O-ring with water or engine coolant. By coating with water or engine coolant, the insertion to the water pump will become easier.

CAUTION:
1. Clean off any engine oil or other grease on the O-ring.
2. Do not fold over or scratch the O-ring during installation.

Post-installation Operation:
- Engine Coolant Supplying.
- Timing Belt Installation.