Operation CHARM: Car repair manuals for everyone.
Home >> Fiat >> 2012 >> 500 Abarth L4-1.4L Turbo >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair >> A/C And Heater Control - Installation >> Automatic Temperature Control (ATC) System
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Automatic Temperature Control (ATC) System





AUTOMATIC TEMPERATURE CONTROL (ATC)





1. Position the A/C heater control (1) to the instrument panel and connect the HVAC wire harness connector (2).





2. Install the instrument panel cover Instrument Panel Cover - Installation.
3. Install the four screws (2, 3, 5 and 6) that secure the A/C heater control (1) to the instrument panel cover (4). Tighten the screws securely.
4. Install the instrument panel center bezel Instrument Panel Center Bezel - Installation.





5. Position the control panel (3) to the instrument panel and connect the HVAC wire harness connector (2) to the accessory switch pod (1).





6. Position the control panel (1) to the instrument panel (2) and engage the retaining tabs that secure the panel to the A/C heater control. Make sure the retaining tabs are fully engaged.
7. Reconnect the negative battery cable.
8. Initiate the Actuator Calibration function using a scan tool .

pro multis · About Operation CHARM