Program The BCM (Body Control Module)

PROGRAM THE BCM (Body Control Module)

NOTE: When replacing the BCM, the BCM must be ordered through the parts department by VIN. The new BCM will arrive within 24 hours.
When replacing any module not the replacement and programming order. For more information see the MODULE REPLACEMENT AND PROGRAMMING ORDER GUIDE in Programming and Relearning.

NOTE: All keys must be present when programming the keys to the BCM, any keys that are not present when programming the BCM will never be able to be programmed to any BCM again.

1. Cycle ignition on (this will also re-sync the key Fob and BCM).
2. Check vehicle for DTC's.
3. Clear all stored DTC's.
4. Turn car OFF then ON and confirm DTC's are gone.
5. Manually (not with key fob) Lock/Unlock the driver door. This will allow BCM to learn the lock status.
6. For more information on programming the keys Programming Ignition Keys To The BCM.

If required, continue to programming the next module.