Operation CHARM: Car repair manuals for everyone.
Home >> Fiat >> 2012 >> 500 Abarth L4-1.4L Turbo >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oil Viscosity Sensor >> Service and Repair >> Oil Viscosity Sensor - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oil Viscosity Sensor - Installation





INSTALLATION





1. Lightly lubricate the new O-ring seal (1) with clean engine oil.





2. Install the oil viscosity sensor (2) to the oil pan and tighten to 13 Nm (115 in. lbs.).
3. Connect the viscosity sensor harness connector (1).
4. Install the belly pan Belly Pan - Installation.
5. Lower the vehicle.
6. If removed, install the oil filter and fill the engine crankcase with the proper oil to the correct level Service and Repair.
7. Connect the negative battery cable and tighten nut to 5 Nm (45 in. lbs.).
8. Run the engine until it reaches normal operating temperature.

pro multis · About Operation CHARM