Operation CHARM: Car repair manuals for everyone.
Home >> Fiat >> 2012 >> 500c L4-1.4L >> Repair and Diagnosis >> Heating and Air Conditioning >> Discharge Air Temperature Sensor / Switch >> Service and Repair >> Air Outlet Temperature Sensor - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Outlet Temperature Sensor - Installation





INSTALLATION

NOTE: The Automatic Temperature Control (ATC) heating and A/C system uses two air outlet temperature sensors, that are mounted in the right side of the HVAC housing. One is for the instrument panel outlets and the other for the floor outlets.

INSTRUMENT PANEL





1. Install the air duct temperature sensor (2) into the right side of the HVAC housing (3). Make sure the sensor is fully engage to the housing.
2. Connect the HVAC wire harness (1) to the air duct temperature sensor.
3. Install the instrument panel support and cover Instrument Panel - Installation.
4. Reconnect the negative battery cable.

FLOOR





1. Install the air duct temperature sensor (2) into the right side of the HVAC housing (3). Make sure the sensor is fully engage to the housing.
2. Connect the HVAC wire harness (1) to the air duct temperature sensor.
3. Install the shifter housing trim panels Instrument Panel Cover - Installation.
4. Install the passenger side silencer panel, when equipped Silencer Panel - Installation.
5. Reconnect the negative battery cable.

pro multis · About Operation CHARM