Lighting and Horns: Description and Operation

How The Circuit Works

Turn Lights
With the Ignition Switch in RUN, current can flow through Fuse 11, the Turn Signal Flasher, Turn/Hazard Switch, and on to the Turn Lights and Turn Indicators.

The turn switch sends the power to either the LH or RH Turn Lights.

Stop Lights
Current flows through Fuse 8 to the rear Turn/Stop Lights when the Stop Light Switch is closed. The same rear lights are used for Stop and Turn Lights (controlled by turn switch).

Hazard Lights
Current flows through Fuse 8 to the Turn Lights and Turn Indicators when the hazard switch is pulled out.

The turn switch sends current to both the RH and LH Turn Lights at the same time.

For Troubleshooting hints, refer to Marker Lamp Testing and Inspection procedures. Testing and Inspection