How to Run Self-Test Using the Continental Message Center

1. On the Electronic Instrument Cluster, hold in all three buttons (SELECT, CHECKOUT and RESET) at the same time.

2. Key On Engine Off Self-Test

^ While holding in all three buttons, place ignition switch in the ON position. Release buttons.

- Key On Engine Running Self-Test

^ While holding in all three buttons, start engine. Release buttons.

3. Press the checkout button three times.

4. To initiate Self-Test, jumper STI to SIG RTN at the Self-Test connectors, or use a STAR tester and latch the center button in the down position. A base readout of [2] [5] [5] [4] indicates that Self-Test has been entered successfully.

5. Service code output will be displayed in the left side boxes following the base display.

6. To exit Self-Test, turn ignition switch to OFF.