DA92 - Check PCM and Vehicle Harness Connectors

- Key "OFF".

- Disconnect Powertrain Control Module (PCM). Disconnect sensor connector. Inspect for damage, loose or pushed out pins, loose or poorly crimped wires.

- Are connectors and terminals OK?

Yes -- Unable to duplicate and/or identify fault at this time. For further diagnosis, refer to Diagnosis by Symptom (Diagnostic Routines).

All others, clear continuous memory. Clearing Keep Alive Memory (KAM) and Relearn Procedure
Rerun quick test. Quick Test Appendix (Detailed Testing Instructions)

No -- Service as necessary. Clear continuous memory. Clearing Keep Alive Memory (KAM) and Relearn Procedure

Rerun quick test. Quick Test Appendix (Detailed Testing Instructions)