Removal

Wheel Cylinder Mounting:

Rear Wheel Cylinder:

1. Raise vehicle on hoist and position suitable safety stands under vehicle. Remove wheel (1007).
2. Remove the wheel, brake drum (1126), and rear brake shoes and linings (2201).
3. Disconnect the brake line from the rear wheel cylinder (2261). Connect a length of hose to the line and submerge end of hose in a can containing a small amount of brake fluid to prevent air from entering the system.
4. Remove the rear wheel cylinder retaining bolts and lockwashers, and then remove the rear wheel cylinder from the brake backing plate (2211).