Second Row Seats

Special Too(s)

DISASSEMBLY

NOTE: The 60% seat is shown, the 40% is similar.

1. Remove the headrest.
^ Insert pin into hole to release rod on both sides.

2. Remove the second row armrest.
^ Remove the four bolts (two each side).

3. Remove the latch control cable from the seat back.
1. Disconnect the cable from the seat back latch.
2. Remove the screw.

4. Remove the flipper panel latch.
^ Pry the latch apart.

5. Remove the flipper panel cover.
1. Unzip the flipper panel cover.
2. Remove the flipper panel cover.

6. Remove the seat cushion support bar.
1. Remove the two bolts.
2. Remove the seat cushion support bar.

7. Remove the seat cushion from the seat back.
1. Remove the four bolts.
2. Remove the seat cushion.

8. Remove the safety belt divider.

9. Remove the seat cover retainers.
^ Remove hog rings and seat cover.

10. Remove the safety belt retractor.
1. Use Safety Belt Bolt Bit to remove the bolt.
2. Remove the retractor.

11. Remove the seat cushion frame.
12. Remove the seat cover from the seat cushion.

13. Remove the seat riser.
1. Remove the two bolts.
2. Remove the riser.

ASSEMBLY

NOTE: The 60% seat is shown, the 40% is similar.

1. Install the seat riser.
1. Position the riser.
2. Install the bolts.

NOTE: Ensure the bushing is installed.

2. Install the seat cushion.

3. Install the seat cushion frame.

4. Install the safety belt retractor.
^ Use Safety Belt Bolt Bit to install the bolt.

5. Install the seat cover.
^ Connect the seat cover retainers.
^ Install the hog rings and listing wires.
^ Connect the hook and loop fastener.

6. Install the safety belt divider.

7. Install the seat cushion frame to seat back frame.
1. Position the seat cushion.
2. Install the four bolts.

8. Install the seat cushion support bar.
1. Position the seat cushion support bar.
2. Install the two bolts.

9. Install the flipper panel cover.

10. Install the flipper panel latch.

11. Install the latch control cable to the seat back.
1. Connect the cable to the seat back.
2. Install the screw.

12. Install the second row armrest.
^ Install the four bolts.

13. Install the headrest.