Indicator Failure

NO PROVE OUT
Does not prove out:
1. Connect the 60 Pin Breakout Box to the Electro-Hydraulic Control Unit (EHCU) with the ABS Adapter Cable.
2. Connect 60 Pin Breakout Box pin 1 (yellow indicator) or pin 4 (red indicator) to the ground pin.
3. Wiggle the wire harness at the several points between the EHCU and the instrument cluster.
4. Repair/replace the wire harness at the location that the indicator flickered off for an open circuit.

ILLUMINATES
1. Wiggle the wire harness at the several points between the EHCU and the instrument cluster.
2. Repair/replace the wire harness at the location that the indicator flickered on for a short to ground.