Outlet

REMOVAL
1. Loosen the air cleaner outlet tube hose clamp screw and separate the air cleaner outlet tube from the engine air cleaner.





2. Disconnect the mass airflow sensor (MAP) connector from the wiring harness and release the air cleaner clamp.





3. Remove the outlet engine air cleaner.
4. Remove the MAP sensor from the outlet engine air cleaner.

INSTALLATION





CAUTION: The grommet used to seal the engine air cleaner housing at the extension must be fully seated. Failure to do so will result in unmetered air entering the engine.

NOTE: Use the alignment notch to properly align the inlet side and outlet side of the engine air cleaner.





To install, reverse the removal procedure.