Installation
INSTALLATION
1. Insert the LH TWC into the RH TWC.
2. Install the pipe clamp.
- Install the two nuts.
3. Position the RH and LH TWCs and install the four nuts.
4. Install the LH to RH TWC pipe clamp.
- Install the two nuts.
5. Install the nuts.
6. Install the transmission support crossmember.
1 Position the transmission support crossmember.
2 Install the LH and RH bolts.
7. Install the nuts.
8. Install the two screws.
9. Remove Hi-Lift Jack.
10. Connect the two HO2Ss and the two CMS electrical connectors.
11. Install the transfer case skid plate.
1 Position the transfer case skid plate.
2 Install the four bolts (two each side).
12. Install the muffler and tailpipe assembly.