Fuel Gauge

Special Service Tool(s):

Special Service Tool(s):

Special Tools

Preliminary Setup:

1. Disconnect the fuel level sensor and pump C415. Connect one lead of the tester to fuel level sensor and pump C415-8, circuit 29 (Y/W), and the other lead to ground.






2. Set the tester to 22.4 ohms. Key ON. Wait one minute. The fuel gauge should indicate E (empty). Key OFF.






3. Set the tester to 145 ohms. Key ON. Wait one minute. The fuel gauge should indicate F (full). Key OFF. Return to the pinpoint test. C: Fuel Level Reads Inaccurately