Fog/Driving Lamp: Service and Repair
REMOVALWARNING: THE HALOGEN BULB CONTAINS GAS UNDER PRESSURE. THE BULB MAY SHATTER IF THE GLASS ENVELOPE IS SCRATCHED OR IF THE BULB IS DROPPED. HANDLE THE BULB CAREFULLY. GRASP THE BULB ONLY BY ITS BASE. AVOID TOUCHING THE GLASS ENVELOPE.
NOTE: The fog lamp bulb should not be removed from the fog lamp until just before a replacement bulb is installed. Removing the bulb for an extended period of time may affect fog lamp bulb performance. Contaminants may enter the fog lamp where they can settle on the lens and reflector. Never turn on the fog lamps with the bulb removed from the fog lamp.
1. Disconnect the fog lamp bulb electrical connector.
2. Rotate the fog lamp socket counterclockwise and remove.
3. Remove the fog lamp.
1. Remove the three fog lamp bolts.
2. Remove the fog lamp.
INSTALLATION
WARNING: THE HALOGEN BULB CONTAINS GAS UNDER PRESSURE. THE BULB MAY SHATTER IF THE GLASS ENVELOPE IS SCRATCHED OR IF THE BULB IS DROPPED. HANDLE THE BULB CAREFULLY. GRASP THE BULB ONLY BY ITS BASE. AVOID TOUCHING THE GLASS ENVELOPE.
NOTE: The fog lamp bulb should not be removed from the fog lamp until just before a replacement bulb is installed. Removing the bulb for an extended period of time may affect fog lamp bulb performance. Contaminants may enter the fog lamp where they can settle on the lens and reflector. Never turn on the fog lamps with the bulb removed from the fog lamp.
1. To install, reverse the removal procedure.