Test Notes
Enter this pinpoint test only when directed here.This pinpoint test is intended to diagnose the following:
- Heated Oxygen Sensor (HO2S)/Heater
- Fuel Injector(s)
- HO2S Connections
- Harness Circuits: HO2S GND, HO2S, INJ 1-8, VPWR and SIG RTN
- Vacuum Systems
- Powertrain Control Module
CAUTION: Probing or piercing wiring insulation is not permitted and may allow water entry, causing corrosion and shorting which may result in HO2S failure.