System Specifications

DIMENSIONS
Surface Finish (RMS) 0.2-0.6 microns
Out-of-Round Limit 38 microns
Out-of-Round Service Limit 127 microns
Taper Service Limit 254 microns
Main Bearing Bore Diameter 72.400-72.424 mm

Surface Finish
Head Gasket Surface-WT = 10.0/2.5. Head Gasket Surface Finish-RZU-13.5 microns. Filter cut off at 0.08 min TPI @ 3.5 microns below the peak 63% min. Cut off at 0.8 mm, 0 Ref =2V.