Crankshaft Main Bearing

DIMENSIONS
Bearing Wall Thickness (STD): 2.436-2.454 mm
Clearance to Crankshaft:
Desired: 0.024-0.048 mm
Allowable: 0.024-0.048 mm





TORQUE SPECIFICATIONS
Tighten all of the main bearing cap bolts in two stages:
Bolts 1 through 10:
Step 1: Torque to 37-43 Nm (27-32 ft. lbs.)
Step 2: Torque an additional 85-95 degrees
Bolts 11 through 20:
Step 1: Torque to 27-33 Nm (20-24 ft. lbs.)
Step 2: Torque an additional 85-95 degrees

NOTE: Refer to the illustration for the bolt tightening sequence.