Removal and Installation
REMOVAL1. Remove the rear quarter window glass.
2. Remove the rear quarter trim panel.
3. Remove the rear half of roof trim panel.
4. Remove the quarter window frame.
1. Remove the nuts.
2. Remove the quarter window frame.
5. Clean the excess foam butyl from the window opening.
INSTALLATION
1. Apply 8 mm foam or equivalent meeting Ford specification WSB-M2G234-C to the rear quarter window glass frame.
- Start at the bottom middle and work around the frame.
NOTE: When applying foam butyl, leave a slight overlap at the bottom to allow for drainage.
2. Install the rear quarter window glass frame.
1. Position the rear quarter window glass frame.
2. Tighten the nuts to specification.
NOTE: Loosely install all the nuts before tightening.
3. Install the rear quarter window glass.
4. Install the roof trim panel.
5. Install the quarter trim panel.