1997 Explorer - Rear Bumper
1997 EXPLORER - REAR BUMPER1. Remove spare tire.
2. Hoist vehicle until bumper is at working level.
3. Clean excessive dirt from inside and outside the bumper. A light amount will not affect the effectiveness of the Super Seal Anti-Corrosion Compound.
4. Spray the back of the bumper with Super Seal Anti-Corrosion Compound paying close attention to the areas around the license plate lights and the top cover retaining tab openings in the bumper. These are the areas that let the back side rust bleed to the front of the bumper and cause stain.
5. Lower vehicle.
6. Reinstall spare tire.
7. Clean off overspray as needed.