Standox(R) Low VOC Recommendation

Standox(R) Low VOC Recommendation (Tech Support 800-551-9296, www.performancecoatings.dupont.com)

1. Remove original sealant materials from the roof ditch area using an air gun with a chisel bit.

2. Prep and clean the roof ditch area with 180 grit sand paper and blow off with compressed air.

3. Wipe the repair area with Standohyd(R) Low VOC Silicone Remover wax and grease remover.

4. Mix and apply 2 medium wet coats of Standox(R) Etching Reaction Primer to all bare metal sand-through areas in the roof ditch. (Recommended film build: 0.32 mill in 2 coats) Mix ratio (Standox(R) TDS 314)13908/1 Part, 11166/1 Part. Allow material to air dry 4 hours at 68° F (20° C) Do not scuff or sand.

SEE COMMON TASKS TO ALL REPAIRS

5. Mix and Apply 2-3 coats of Standox(R) 2.1 Filler

+ 30% Standox(R) 2K Plasticiser (Recommended film build: Max. 3.0 mil in Max. 2 coats) Mix ratio (Standox(R) TDS 545) Volume (mixing stick A) 11999/1 Part, 15260/30%. Above is then mixed 2:1+30% with: 10089/15277-1 Part, 10097/15269- Approximately 30% (to viscosity). Air dry 3 hours or flash 5-10 minutes then force dry 30 minutes at 140° F. Scuff sand with red 3M Scotch-Brite(R) Pad.

6. Blow off the roof ditch with compressed air; wipe the repair area with Standohyd(R) Low VOC Silicone Remover wax and grease remover, and tack off to remove loose dust and debris.

7. Apply Standox(R) MSB Basecoat to hiding. (0.6 - 1.0 mil) (Standox(R) TDS 610, Important Remarks Section) Mix Ratio: Standox(R) color, Volume (mixing stick A) 1 Part, 10089/15277-20%. 11050/11395-30-40% (to viscosity) Allow material to air dry 20-30 minutes. Do not scuff or sand.

8. Apply 2 medium wet coats of Standox(R) 2.1 Clear + 15-30% Standox(R) 2K Plasticiser (Recommended film build: 2.0 - 2.4 mils in 2 coats (Standox� TDS 577) Mix Ratio: 10020/1 Part, 15260/15-30%. Above is then mixed 2:1+5-10% with: 10089/15277-1 Part, 10097/15269-5-10%. Allow the material to air dry 4 - 6 hours or bake 30-40 minutes at 140°F.

9. De-mask the vehicle and deliver to the customer.