Torque Specifications and Procedures

Torque Specifications - Crankshaft Main Bearing Bolts






Vertical

Tighten the bolts in two steps in the sequence shown.
- Step 1: Tighten to 40 Nm (30 ft. lbs.).
- Step 2: Tighten an additional 90 degrees.






Side Bolts

Install the side bolts and tighten in two steps, in the sequence shown.
- Step 1: Tighten to 27-33 Nm (20-24 ft. lbs.).
- Step 2: Tighten an additional 85-95 degrees.