G: LFC 15/DTC B1916 - Driver Air Bag Circuit Short to Batt/Ign
Normal OperationThe Restraints Control Module (RCM) checks for driver air bag circuit shorts to battery or ignition by monitoring the voltage of circuits 614 (GY/OG) and 615 (GY/WH) at pins 3 and 4. If the RCM detects a short to battery or ignition on either of these pins, it will store a Diagnostic Trouble Code (DTC) B1916 in memory and flash a Lamp Fault Code (LFC) 15 (or higher priority code if one exists) on the air bag indicator.
Possible Causes
A driver air bag circuit short to battery or ignition could be caused by.
- a short to battery or ignition on circuit 614 (GY/OG).
- a short to battery or ignition on circuit 615 (GY/WH).
- a short to battery or ignition on the air bag sliding contact.
- a short to battery or ignition on the driver air bag module.
- an RCM internal concern.
Pinpoint Test Steps: