Ride Height Sensor: Service and Repair

Removal

1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so may result in unexpected inflation or deflation of the air springs which may result in shifting of the vehicle during these operations.

Raise and support the vehicle.





2. Disconnect the air suspension height sensor electrical connector.





3. Depress the metal retaining tabs and remove the air suspension height sensor.


Installation





1. To install, reverse the removal procedure.
^ Press the metal tabs and snap onto ball mounting studs.