Inspection and Verification

Inspection and Verification
1. Verify the customer concern by operating the system.

Visual Inspection Chart:

Visual Inspection Chart

2. Visually inspect for obvious signs of mechanical and electrical damage.
3. Verify the headlamps are operating correctly. Correct any concerns before proceeding to the next step. For additional information, refer to Lighting and Horns.
4. Verify the parking brake control is fully released.
5. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
6. If the concern is not visually evident, verify the symptom and refer to the Symptom Chart. Symptom Related Diagnostic Procedures