Output Shaft Speed (OSS) Sensor
Output Shaft Speed (OSS) SensorRemoval
1. Raise and support the vehicle.
2. Disconnect Output Shaft Speed (OSS) sensor electrical connector.
3. Remove OSS sensor.
1 Remove the OSS sensor screw.
2 Remove the OSS sensor from the transmission.
- Inspect the OSS sensor O-ring for damage. If damaged, install a new O-ring.
Installation
1. Inspect and lubricate O-ring with petroleum jelly.
1 Install the OSS sensor into the transmission.
2 Tighten OSS sensor screw.
2. Connect OSS sensor electrical connector.
3. Lower the vehicle.