Rear Bumper Cover / Fascia: Service and Repair

REAR BUMPER COVER

Removal and Installation

NOTE: Navigator shown. Expedition similar.







1. Remove the rear fender splash shield bolts.







2. Remove the rear bumper cover nuts and bolts.







3. If equipped, disconnect the reverse parking aid electrical connector.







4. Remove the rear bumper cover lower pin-type retainers.







5. Remove the liftgate trim.
- Remove the pin-type retainers.







6. Remove the rear bumper cover.
- Remove the pin-type retainers and bolts.

7. To install, reverse the removal procedure.