Roof Opening Panel Rear Trough Guide
ROOF OPENING PANEL REAR TROUGH GUIDEREMOVAL
1. NOTE: This procedure does not pertain to vehicles built before October 1999.
Remove the roof opening panel.
2. Remove the two trough guide retaining screws.
3. Remove the trough from the trough guide assembly.
4. Disconnect the trough guide rods from the lifter arm assemblies.
5. Slide the trough guide back to the slot (approx.15 mm ) cut in track.
6. Carefully twist trough guide through the slot in the track to remove.
7. Inspect the trough guide assembly for damage. If damage is found, inspect the track for broken pieces and remove them.
INSTALLATION
1. To install, reverse the removal procedure.
2. If necessary, adjust roof opening panel.