Vehicle Damage Warnings
CAUTION:- Use a screwdriver to pry beneath the attaching metal clips.
- To prevent possible damage to the third row seat or the safety belts, make sure that the safety belts are not fastened when moving the seat to the load floor position.
- Make sure that no objects such as books, purses or briefcases are on the floor in front of the third row seats or on the seat cushion before lowering the backrest(s).
- Use care when removing the lumbar knob. Using both hands, pull with even pressure on both sides of the knob to remove.
- Do not damage the plastic pivot bushing when installing the seat back frame.
- Use care when separating the seat backrest trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the seat backrest foam.
- Use care when removing the seat backrest foam pad from the frame. The foam pad has hook and loop fasteners holding the thermo-electric device (TED) to the seat backrest foam pad.
- Make sure to remove all the rivet metal chips from sensor and surrounding areas.
- Use care when separating the seat backrest covering from the hook-and-loop fasteners to avoid tearing the fastener off the seat foam.