Third Row, 60 Percent

REAR SEAT BACKREST - THIRD ROW, 60 PERCENT

DISASSEMBLY

All vehicles
1. Remove the third row 60 percent seat backrest.







2. Remove latch trim cover (inboard side).







3. Remove the safety belt anchor bolt.







4. Depress the tab and remove the head restraint.







5. Release the J-clip.







6. Remove all the staples.

Manual seat







7. Remove the seat backrest release handle screws and remove the handle and cable assembly.

All vehicles







8. Remove the bolt and remove the seat base.







9. Remove the safety belt guide.







10. NOTE: The head restraint sleeve pins are not interchangeable. Note location for installation.

Reach up into seat backrest and squeeze the head restraint sleeve ends together to release the sleeves and pull the head restraint sleeves out.

11. CAUTION: Use care when separating the seat backrest trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the seat backrest foam.

Invert the seat backrest trim cover and remove.

12. Remove the seat backrest foam pad.







13. Remove the two bolts and remove the seat base.







14. Remove the four screws in seat belt cover (two shown).







15. Remove the seat belt bolt.







16. Pinch to release the seat belt guide and remove the seat belt assembly.







17. Remove the screws in the rear seat backrest support panel.







18. Remove the seat backrest tether anchor bolt.

ASSEMBLY
1. To assemble, reverse the disassembly procedure.