Checking the Engine Oil

1. Make sure the vehicle is on level ground.

2. Turn the engine off and wait up to 10 minutes for the oil to drain into the oil pan.

3. Set the parking brake and ensure the gearshift is securely latched in P (Park).

4. Open the hood. Protect yourself from engine heat.




5. Locate and carefully remove the engine oil level indicator (dipstick).

6. Wipe the indicator clean. Insert the indicator fully, then remove it again.

- If the oil level is between the MIN and MAX marks, the oil level is acceptable. DO NOT ADD OIL.




- If the oil level is below the MIN mark, add enough oil to raise the level within the MIN-MAX range.

- Oil levels above the MAX mark may cause engine damage. Some oil must be removed from the engine by a service technician.

7. Put the indicator back in and ensure it is fully seated.